added images, wrote on good out of the box experiences.

content/posts/ferrisSweepKeyboard/index.md

@@ -3,7 +3,7 @@ title = "Building My New Keyboard."
 date = 2024-02-06T15:01:28-06:00
 draft = false
 [cover]
-image = "layers/layer0"
+image = "keyboard_with_case"
 +++
 
 Ive been using a split keyboard at home now for several years,
@@ -17,8 +17,6 @@ Eventually, though, I stumbled upon the github page for the [Ferris Sweep](https
 
 ## The Basic Build
 
-<!--TODO: insert pic of completed keyboard-->
-
 The Sweep seemed simple enough that I could assemble it,
 and after doing some shopping around, I was able to source all the parts I needed for under $100.
 I ordered the pcb from JLPCB and the parts from [Keebio](https://keeb.io/) and [Lowprob.ca](https://lowprokb.ca/),
@@ -33,6 +31,8 @@ and finally soldered the switches in. (I used choc purpz, a bit of a leap of fai
 I did ruin one switch by letting a leg getting hot enough to melt the housing plastic,
 and desoldering it was unexpectedly difficult, but not every build can be mistake free, right?
 
+![The finished keyboard](finished_keyboard.jpg)
+
 Flashing QMK was uneventful, working exactly as the [QMK docs](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ferris/sweep) for the Ferris Sweep suggested.
 I would, however, recommend flashing the micros _before_ doing any soldering,
 I had to take my micros out of their sockets in order to access the boot buttons.